Link From : Home | Educational and Research Equipments | ToothBrush Simulator

LAB 8020 SDN. BHD Supplies Oxygen Concentrators, Oxygen Cylinders, Nebulizers, Humidifiers, Microscopes, Laboratory Boiling Glasswares, Laboratory Blown & pressed Glasswares, Laboratory Bottles, Volumetric Glasswares, Laboratory apparatus, Laboratory Coats, Hospital Electric Beds, Hospital Manual Beds, Dental Unit, Ovens, Incubators, Centrifuges, Balances, Thermometers, Shakers, Skeleton Models, Digital BP Meters, Mercury BP Meters, Wheel Chairs, Stethoscopes, Chemicals, Stirrers, Stirring Motors, Suction Aspirators, Digital Autoclaves, Amplitron Thermal Cycler, Opthalmoscopes, Oscilloscopes, Otoscopes, Oxygen Regulators, Ph meters, Projectors, Radioactive Source Kit, Refrigerators.

ToothBrush Simulator

COMPANY : SD MECHATRONIK GERMANY

D448/35	ZM-3.12	TOOTHBRUSH SIMULATOR
CODE	MODEL	DESCRIPTION	CATALOGUE

The device simulates various brushing movements on the surfaces of teeth and test pieces.

Up to a maximum of 8 (12) specimens are simultaneously exposed to abrasion in the tooth brushing machine. The individual specimens may be of various forms and materials (hardness), and may be loaded with various levels of contact pressure. The specimen chambers are separated from each other so that each specimen can be operated with its own liquid (e.g. toothpaste-water mix), and individually cleaned. All the brushes are controlled by a central drive system, and the chosen type of movement is therefore the same for all specimens used in the trial. A high-grade motion controller guarantees exact speeds and trajectories which can be adjusted with a very high degree of precision. The motion sequence (teeth cleaning technique) can be freely selected from a combination of forwards, backwards and circular movements. Complex motion sequences can be easily programmed by means of an optional software module.

Technical Information
→ 8 or 12 specimen chambers
→ Specimen chambers can be individually removed and cleaned
→ Between 1 and 4,000,000 process stages with an auto-stop function once preset operation reached
→ The number of cycles, type of movement and meter reading is adjusted and shown via the PC which is included with (ready-installed) application software
→ Contact pressure from 50 g to 300 g per specimen in 50g increments
→ Standard motion sequences (teeth cleaning technique): forwards, backwards and zigzag motion, as well as circular motion
→ An optional software module allows additional complex motion sequences
→ Brush heads fixed with two screws
→ Specimen surface up to 20 mm by 20 mm; specimen height up to a maximum of 15 mm
→ Standard specimen holders as well as brush holders are included with the device supplied

CODE : D219/1
MODEL : 178104
COMPANY : EICKEMEYER GERMANY

RASP PLATE FOR ELECTRIC TOOTH RASP

Note : Please mention the product "CODE" while making request for quotation and send it to info@globalxesslab.com