Measuring Oil in Water / Soil Testing

HI993310 Direct Soil Activity and Solution Conductivity Measurement Kit^New
COMPANY : HANNA ROMANIA

CODE	MODEL	DESCRIPTION	CATALOGUE
1462/157	HI993310	DIRECT SOIL ACTIVITY AND SOLUTION CONDUCTIVITY MEASUREMENT KIT

The HI993310 is a rugged, portable meter that has been designed to address the need for fast and accurate conductivity measurements in liquids and soils. The HI993310 directly measures soil solution conductivity in EC (mS/cm) as well as soil activity (g/L). It is supplied with two probes: HI76305 with stainless steel, conical tip for direct soil measurement and HI76304 for fertilizer enriched solutions.

→ EC Range : 0.00 to 19.99 mS/cm
→ EC Resolution : 0.01 mS/cm
→ EC Accuracy : ±2% FS
→ Soil Activity Range : 0.00 to 1.00 g/L
→ Soil Activity Resolution : 0.01 g/L
→ Soil Activity Accuracy : ±2% FS
→ Temperature Compensation : automatic from 0 to 50°C (32 to 122°F) with β=2%/°C typical → Calibration : manual, one point → Electrode/Probe : HI76305 stainless steel conductivity probe with internal temperature sensor, DIN connector and 1 m (3.3’) cable for direct soil measurement (included); HI76304 conductivity probe with internal temperature sensor, DIN connector and 1 m (3.3’) cable for mea

COMPANY : SPECTRO SCIENTIFIC USA

CODE	MODEL	DESCRIPTION	CATALOGUE
1397/201	InfraCal 2 ATR-SP	INFRACAL 2 MODEL ATR-SP CALIBRATED WITH TOG/TPH LOW RANGE HEXANE 100 M SYRINGE

The InfraCal 2 ATR-SP is recommended for measuring oil in water, TPH in soil/drilling waste or FOG in wastewater using the traditional EPA methods 413.2 and 418.1 or ASTM method D7066-04. Measurement data obtained with this analyzer will correlate to EPA Method 1664 as both procedures are based on evaporation techniques and measuring the residual oil and grease. The analyzer is equipped with a built-in cubic zirconia horizontal attenuated total reflection (HATR) stainless steel sample stage. The analysis takes less than 10 minutes and is accurate down to 0.3 ppm oil in water.

→ Testing produced water on offshore or onshore oil rigs
→ Monitoring refinery or industrial plant wastewater effluents
→ Measuring FOG discharge levels
→ Checking oil/water separation systems
→ Measuring oil in drilling mud/cuttings
→ Testing for residual oil on pre-cleaned metal components
→ Determining the purity level of reclaimed solventsv
→ Onsite testing of soil at remediation sites

Accessories
COMPANY : SPECTRO SCIENTIFIC USA

Note : Please mention the product "CODE" while making request for quotation and send it to info@globalxesslab.com