Hydrolysis Unit

PART NUMBER : F30300110
COMPANY : VELP SCIENTIFIC ITALY

CODE	MODEL	DESCRIPTION	CATALOGUE
1887/11	HU 6 UNIT(F30300110)	HYDROLYSIS UNIT HU 6 STAINLESS STEEL,230V/ 50-60HZ, ACHIEVEMENT OF THE SET TEMPERATURE DISPLAY,VISUALIZATION LCD, PROGRAMMABLE WORKING TEMPERATURE FROM ROOM TO 200 ° C, AUTOMATIC TEMPERATURE CALIBRATION,ACHIEVING SET TEMPERATURE TO SIGNAL DISPLAY-

Improves Analysis
Hydrolysis / digestion by acid or base
Ensures conformity with AOAC standard
No sample transfer – no sample loss
Crucibles go directly into SER 148

Operator Safety
Reduces handling to a minimum
Automatic extraction of unwanted fraction
No exposure to vapors

Recommendations
Select a glassware kit and accessories to match workload
Hydrolysis is carried out with hydrochloric acid for approximately 60 minutes at 170 °C.
The hydrolyzed sample is then filtered in a glass crucible and washed with warm deionized water in order to eliminate the residues of hydrochloric acid

Perform single or multiple samples at the same time. HU6 is required for a preliminary hydrolysis, both for acid and basic hydrolysis, of food and feed samples prior to solvent extraction with SER Series. HU6 ensure fast heating and reduced time, with all the benefits of the aluminum block in terms of temperature transmission and homogeneity. No sample transfer prevents any possible sample loss, as the same crucibles can be processed by the solvent extractor SER. HU6 needs to be combined with a dedicated glassware to be ready to use.

CODE : 1887/12
MODEL : A00000085
COMPANY : VELP SCIENTIFIC ITALY

GLASS WARE KIT 3 POSITION FOR HYDROLYSIS UNIT HU 6

The HU 6 works in combination with the SER 148 according to Official Procedures providing highly accurate and precise results for fat content determination.

Note : Please mention the product "CODE" while making request for quotation and send it to info@globalxesslab.com