Furnace
ELECTRIC MUFFLE FURNACE - FTMP SERIESNewCOMPANY : SCI FINETECH CO KOREA
CODE | MODEL | DESCRIPTION | CATALOGUE |
4004/50 | FTMF-706 | MUFFLE FURNACE ELECTRIC 27 LITERS, 300X300 X 300MM TEMP. 300 TO 1000 DC, DIGITAL PID CONTROLLER, ASCENDING TEMPERATURE 800DC,ASCENDING TEMPERATURE APPROXIMATELY 23 MIN, AC 230V, 50/60Hz.- |
---|
Very suitable for various purposes like gravimetric analysis for organic substance and measurement of quantity for coal and lime. With the distinguished Digital P.I.D controller, it provides you with precise control of temperature and easiness to operate this equipment. By the highly efficient heater installed in the four sides of the chamber, it directly heats materials which are handled. With this excellent feature, it surely reduces time of temperature climb. To prevent it from over heat and short circuit, the specialized safety device is installed.
TemperatureRange : 300 ~ 1,000°C(Max. 1,150°C);
AscendingTemp. : 800°C;
Ascending Time : Approximately 23min;
Temp. Controller : Digital PID controller(Program type: 5 pattern 18 step);
Temp. Indication : Setting Temperature & Measuring Temperature;
CODE | MODEL | DESCRIPTION | CATALOGUE |
1752/1 | F6010 | FURNACE WITH (A1) DIGITAL SINGLE SETPOINT TEMPERATURE CONTROLLER, 240V, 14 LITER CAPACITY, 100 TO 1200 DEGREE |
---|
Description
→ Heating elements are located on top, bottom, and sides of chamber for enhanced
temperature uniformity.
→ Built-in venting system removes undesirable contaminants and moisture; extends the life
span of the element and unit.
→ The rear of the chamber incorporates a 0.38" (0.95 cm) diameter port for monitoling
chamber temperatures with independent measuring devices.
→ Optional stainless steel shelf doubles load capacity (maximum temperature of 900°C).
→ Door safety switch protects operator by remO\~ng power to the heating clements upon opening the door.
→ Thermocouple break protection cuts power to the heating elements, prevents a thermocouple failure runaway condition.
→ Models F6010 and F6018 are supplied with cord and plug set, all others require conduit connection.
CODE | MODEL | DESCRIPTION | CATALOGUE |
1752/2 | F47910-26 | Benchtop Muffle |
---|
Description
→ 1\vo chamber sizes: Type F47900 offers 120 cubic inches of heating area. Type F48000 provides 350 cubic inches of heating area; a ceramic shelf is included to double fumace load capacity (SH480X1).
→ Open coil heating elements on both sides of chamber assure fast heat-up, with minimum temperature gradient.
→ Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient ceramic insulation.
→ The rear of the chamber incorporates a 0.38" (0.95 cm) diameter port for monitoring chamber temperatures with independent measuring devices.
→ AU models shipped complete with power cord.
CODE | MODEL | DESCRIPTION | CATALOGUE | YOUTUBE |
1752/5 | F47910-33 | FURNACE MUFFLE BENCHTOP RANGE 100-1200DC 2.0L 240V CE | ||
---|---|---|---|---|
1752/30 | EL479X1A | ELENENT ASSEMBLY FOR MODEL F47910-33 FURNACE MUFFLE BENCHTOP |
Specification
Capacity : 2 liters
Controller Type : A1 - Digital Single Setpoint
Heater Wattage : 1000 Watts
Inside Depth : 6 inches
Inside Height : 4 inches
Inside Width : 5 inches
LowerTemperature Range : 100 Degrees Celsius
Operating Frequency : 60 Hz
Overall Height : 18-63/64 inches
Overall Length : 15-1/2 inches
Overall Width : 11-19/64 inches
CODE | MODEL | DESCRIPTION | CATALOGUE |
4004/44 | SEF-303 | MUFFLE FURNACE ELECTRIC 27 LITERS, 300X300 X 300MM TEMP. 300 TO 1000 DC |
---|
Specification
Working range of temperature : 300 ∼ 1,000℃
Ascending Temperature : 800℃
Ascending Time : Approximately 20 min
Temperature Controller : Digital PID Controller (Program/P)
Temperature Indication : Setting Temperature & Measuring Temperature
Heat Transmission : K-Type
Feature : PID Timer functicon for temperature control (99hours 59minutes) and self diagnosis system
Internal Capacity : 27 Liters
Power Consumption : 6.2 kilowatts
Supply Voltage & Frequency : AC 230V, 1¢, 50/60Hz
Weight : Approximately 55 kg
CODE | Model | Company | Description | Image |
1728/3 | EL 11 X 12 | THERMOLYNE | HEATING ELEMENT. |
---|
CODE | Model | Company | Description |
1752/6 | TC1249X1 | THERMOFISHER,USA | THERMOCOUPLE ASSEMBLY FOR FURNACE F6010- |
---|---|---|---|
SP/102 | CN71X185 | THERMOFISHER UK | CONTROLLER FOR FURNACE F6010 |
1728/4 | JC 221 X 1 | THERMOLYNE U.S.A. | INSULATION |
1728/1 | EL 44 X 2 | THERMOLYNE U.S.A. | HEATING ELEMENT |
1728 | EL 48 X 2 | THERMOLYNE U.S.A. | HEATING ELEMENT |
1727 | 07028,2160W | THERMOLYNE U.S.A. | HEATING UNIT 1.5-2 GALLON 240/480V |
1726 | 17610 | THERMOLYNE U.S.A. | HEATING UNIT FOR 1.5-2 GALLON 220V/222W |
1725 | 9019 B | THERMOLYNE U.S.A. | HEATING UNIT FOR 1.5 - 2 GALLON CAPACITY |
1730 | 2158 | WISCONSIN U.S.A. | HEATING ELEMENT 220V |
1729 | EL 34-651/12 | ELE ENGLAND | HEATING ELEMENT |
Note : Please mention the product "CODE" while making request for quotation and send it to info@globalxesslab.com